|
|
| |
Shop
| |  |
|
Best Sellers | | Home Bostitch RH-MC14815GAL-S Thickcoat Round Head 1-1/2-Inch-by-.148-Inch-by-21-Degree Plastic Collated Metal Connector Nail (1,000 per Box) | |
|  | |  | | | Bostitch RH-MC14815GAL-S Thickcoat Round Head 1-1/2-Inch-by-.148-Inch-by-21-Degree Plastic Collated Metal Connector Nail (1,000 per Box) | | | | | SKU:
2750-4893 | | In Stock | | Availability:
Usually ships in 1-2 business days | | | | | | | 1,000 Count 1-1/2" x .148 Galvanized Metal Connector Nail Heat Treated To Be Used In Bostitch N88RH-2MCN & F21PL | | | |
List Price:
| $64.00 | |
Our Price:
| $41.14 | |
You Save:
| $22.86 (36%)
| | *Shipping: | $14.50 | |
*Shipping:
| |
| | |
|
| | Product Details | | Product Length: | 12.0 inches | | Product Width: | 5.0 inches | | Product Height: | 2.0 inches | | Product Weight: | 7.18 pounds | | Package Length: | 11.0 inches | | Package Width: | 4.8 inches | | Package Height: | 2.0 inches | | Package Weight: | 8.6 pounds | | Average Customer Rating: |  based on 7 reviews |
| |
| | Features | 1 1/2" x .148Smooth ShankThickcoat Galvanized Finish, Heat Treated1000 Nails Per BoxFor Use in the Bostitch F21PL and N88RH-2MCN Industrial Roundhead Stick Framing Nailers
| |
| | Customer Reviews | Average Customer Review: ( 7 customer reviews )
Write an online review and share your thoughts with other customers.
Most Helpful Customer Reviews
1 of 1 found the following review helpful:
 If you are nailing metal connectors, use the right nails Nov 13, 2009
By J. Hertig
"7cats"
Metal connectors are quite useful when doing framing. Pounding in all the nails is a pain. So using a pnuematic nailer is really helpful.
If your nailer will do this, then you'd be hard pressed to find better nails than these. They are specially hardened, so that if you miss the hole a bit, they will still go through. And they are available in thicker sizes than regular nails of this length (which is perfect for nailing a bracket to a 2" board without protruding from the back). They are heavily galvanized, so you would be hard pressed to find anything more rust resistant. Really, they have no down side.
Works well with the different metal connetors I have tried May 18, 2011
By Alan Laidlaw
The long strings of nails have to be bent a little to get then into the nail gun but work well will the connectors.
 nails are fine Dec 14, 2010
By BJV
These are fine, sturdy nails for attaching metal connector plates. The only minor irritation is the plastic connector sometimes inhibits the group of nails sliding toward the nail gun head. A gentle bump against the spring easily bumps the nail into the proper position to be fastened.
Great for metal connector installation Jul 28, 2009
By William
When used with a nail gun like the Bostitch F21PL, these nails make metal connector installation a breeze. If you have ever lamented the fact that your regular nailer isn't accurate enough to hit the holes on metal connectors, the F21PL and these nails are the solution to your problem.
I installed dozens of joint hangers, post bases, and other metal connectors in short order when building my new deck. I recommend the nail gun and these nails to anyone who is using metal connectors.
1 of 3 found the following review helpful:
nails Mar 28, 2008
By R. Norman
Received these nails 8 days after ordering using the free shipping,
and in perfect condition
See all 7 customer reviews on Amazon.com
| |
* Estimated shipping rate for US 48 states. Final rate calculated at checkout. | |
|
| |  | |  |
|
Recently Viewed | You may also like ... |
|
|
