 Best Sellers |  | Home   DEWALT DC618K XRP 18-Volt Cordless 1-1/4 Inch - 2-1/2 Inch 16 Gauge 20 Degree Angled Finish Nailer Kit | |
|  | |  | | | DEWALT DC618K XRP 18-Volt Cordless 1-1/4 Inch - 2-1/2 Inch 16 Gauge 20 Degree Angled Finish Nailer Kit | | | | | SKU:
HWR-767816 | | In Stock | | Availability:
Usually ships in 1 business days | | | | | | Enjoy the power and efficiency of pneumatic nailing with the DEWALT DC618K heavy-duty 20-degree angled finish nailer kit, which can drive 16 gauge nails from 1-1/4 to 2-1/2 inches in length as rapidly as five nails per second. This cordless nailer is powered by DEWALT's 18-volt XRP batteries, and this kit comes with one battery and a 1-hour charger.  The 20-degree angled DC618K nailer (view larger). | DC618K 18-Volt, 16 Gauge, 20-Degree Angled Finish Nailer Kit At a Glance: - Consistent nail penetration into both soft and hard joints
- Sequential and bump operating modes
- Integrated LED lights
- Includes one battery and 1-hour charger
- Three-year limited warranty; two-year free service
| | | | Power and Performance The DC618K's engine design allows the tool to work as fast as you do with consistent nail penetration into both soft and hard joints. The 20-degree angled magazine (with up to 120-nail capacity) will accept DEWALT and Paslode 20-degree nails, and it has a rear-load magazine. You'll have easy access to the nosepiece for the removal of jammed nails without the use of screwdrivers or tool wrenches, and the contact trip lock-off allows trigger to be disabled when not in use. Comfort and Convenience You can select sequential operating mode to ensure precision placement of each nail or a bump operating mode that allows you to harness top speed. A 6 position dial enables you to move between applications without having to re-acquire exact depth setting. And at just 8.5 pounds, this tool is lightweight for easy maneuvering and reduced operator fatigue. This nailer also includes integrated LED lights for perfect placement in low-lit or shadowy areas. DEWALT's XRP Extended-Life Battery System A tool's only useful if it runs long enough to get the job done, and the DEWALT XRP extended run time batteries keep the DC618K running at full tilt. They provide up to 40 percent more run time than standard Ni-Cad batteries, and any XRP battery can be used with any 18-volt DEWALT tool, which allows you to expand your system by adding other DEWALT cordless tools (sold separately) as the demands of your job grow. The DC618K comes with one 18-volt XRP battery and a 1-hour charger. Warranty This DEWALT tool is backed by three-year limited warranty covering any defects due to faulty materials or workmanship (from the date of purchase). It's also covered by DEWALT's two-year free service contract, where DEWALT will maintain the tool and replace worn parts caused by normal use--for free. What's in the Box DEWALT DC618K 20-degree angled nailer; 18-volt XRP battery; 1-hour charger; reversible belt hook; no-mar tip; safety glasses; operating instructions  The DC618K engine works as fast as you do--driving up to five nails per second (view larger). |
| | | |
List Price:
| $353.19 | |
Our Price:
| $320.99 | |
You Save:
| $32.20 ( 9%)
| | Shipping: | This item ships for FREE with Super Saver Shipping. | |
*Shipping:
| |
| | |
|
| | Product Details | | Product Length: | 18.5 inches | | Product Width: | 15.25 inches | | Product Height: | 7.0 inches | | Product Weight: | 17.0 pounds | | Package Length: | 16.7 inches | | Package Width: | 15.4 inches | | Package Height: | 6.5 inches | | Package Weight: | 21.0 pounds | | Average Customer Rating: | based on 53 reviews |
|  |
| | Features | Engine design allows the tool to work as fast as the end user with consistent nail penetration into both soft and hard jointsSequential operating mode allows for precision placement and the bump operating mode provides the user with production speed.Easy access to the nosepiece for the removal of jammed nails without the use of screwdrivers or tool wrenchesContact Trip Lock-Off allows trigger to be disabled when not in useIntegrated LED lights for long life and durability; Top cap is impact resistant and easy to remove for troubleshooting
|  |
| | Used and New |
| All | |
| $279.99+ $14.99 *Shipping | Used
- Mint | | | $320.99 This item ships for FREE with Super Saver Shipping. | New | | | $339.99Shipping Free | New | | | $340.98+ $12.50 *Shipping | New | | | $349.00Shipping Free | New | | | $354.07+ $19.49 *Shipping | New | | | $356.63Shipping Free | New | | | $375.95+ $15.50 *Shipping | New | | | $375.95+ $15.22 *Shipping | New | | | $381.05+ $17.64 *Shipping | New | | | $390.91+ $26.74 *Shipping | New | | | $397.73+ $20.99 *Shipping | New | | | $405.94+ $14.92 *Shipping | New | | | $422.53+ $22.50 *Shipping | New | | | $440.18+ $12.50 *Shipping | New | | | $442.99+ $17.05 *Shipping | New | |
| New | |
| $320.99 This item ships for FREE with Super Saver Shipping. | New | | | $339.99Shipping Free | New | | | $340.98+ $12.50 *Shipping | New | | | $349.00Shipping Free | New | | | $354.07+ $19.49 *Shipping | New | | | $356.63Shipping Free | New | | | $375.95+ $15.50 *Shipping | New | | | $375.95+ $15.22 *Shipping | New | | | $381.05+ $17.64 *Shipping | New | | | $390.91+ $26.74 *Shipping | New | | | $397.73+ $20.99 *Shipping | New | | | $405.94+ $14.92 *Shipping | New | | | $422.53+ $22.50 *Shipping | New | | | $440.18+ $12.50 *Shipping | New | | | $442.99+ $17.05 *Shipping | New | |
| Used | |
| $279.99+ $14.99 *Shipping | Used
- Mint | |
|  |
| | Customer Reviews | Average Customer Review: ( 53 customer reviews )
Write an online review and share your thoughts with other customers.
Most Helpful Customer Reviews
141 of 142 found the following review helpful:
DeWalt Scores First Time Out! Sep 02, 2004
By M. Kellum No, I am NOT a pro finish guy--former pro-painter guy. I have remodeled about half my house so far, so I would most likely just be a DIY guy. HOWEVER, my experience with interior painting on high-end, high-production tract home projects has made me expert in making the finished product look great no matter what (even though the popular phrase around the jobsite was "the painters will fix it").
Just picked the nailer up August 31st from H.D...
First impressions: This thing is freakin' heavy! I compared it to my Senco FramePro 702XP framing nailer (with 1 stick of 3 1/2 nails in it) and they weigh the same (about 8 pounds). My neighbor has a Senco AirFree cordless nailer, it feels like a toy in comparison to the DeWalt.
Pro's:
* Cordless! Don't have to drag out the air compressor.
* Cool headlights. Good for doing trim in darker areas.
* Shoots 16 gauge angled stick nails (Paslode nails were all I could find to fit at H.D.) Used for crown, casing, base and quarter-round shoe molding--made small, tight holes, no problems.
* Accurate electronic depth adjustment. 1-6 range, 6 setting will just countersink in 3/4 oak
* Bump-firing! Unlike Senco AirFree, you can set the DeWalt to single fire or bump. When on bump mode, it drives at a consistent depth. The motor spools up when you press the trigger, and then bam, bam, bam
* Good grip. Feels like typical DeWalt grip. Stays in you hand while sweaty, quality trigger feel.
* Spare battery. Good Dewalt charger, quality carrying case (with steel buckles instead of plastic)
Cons
* Porky. Not just heavy, but the head of the unit is kinda fat, it has a belt clip, which you have to use, because you can't park it in your bags. It does work OK with a Monster Hook, so no big whoop. It will also nail shoe molding just fine while upside-down.
* Yellow headlights. I know yellow is DeWalt's thing, but white would have been better.
* Price. $400.00 is a good chunk of cash.
Overall, great result for a first-time release. Absolutely SPANKS the Senco AirFree--then sends it to bed without dinner.
67 of 67 found the following review helpful:
it works good! Sep 12, 2004
By K. R. mcmahon
"Honey-Do Man"
Just bought this tool in sept. and used it to frame several door jambs and casing. it works good. a little heavy, but a lot lighter than a compressor, hose etc. if you buy the angle gun the price of the nails are about 50% more than if you buy the other dewalt straight nailer. because at hd you can buy paslode nails for this angle gun or with the straight gun you can buy senco or porter cable nails. however the angle nailer is better for reaching into corners. As with most dewalt tools you have to use them for 15-30 days to make sure they do not fall apart or break down. but so far I recommend this gun. GUN UPDATE:>12-1-04: IT WORKS GREAT!. have done several jobs no compressors or hoses, entire house molding, casing and the gun works great. no hassels with hoses and watching out so nothing gets knocked over. I have used this gun now for 90 days and have had great success. good job dewalt.
36 of 36 found the following review helpful:
Good tool and It makes a lot of sense if you own 18V tools now Oct 22, 2005
By R. Ball
"harryball"
This tool is solid and works as advertised. So it weighs 8.5 lbs... if you are going to be nailing over your head for hours straight then break out the air hose. I did the same when using my Paslode.
This tool replaced my Paslode Impulse Finish nailer. I've not looked back. Ample power and drives nails well with very predictable depth control.
Get the angled nailer, easier to place and nail in tighter spots. With the size of the gun, you'll need it.
If you are looking for the possible negatives...
Somewhat costly to purchase
It is heavy, but the tool compensates me for this with performance and convenience
I miss being able to sit the tool down on the front face like the Paslode. The Dewalt rolls over sideways if you try. This makes it difficult to set it down and retrieve from the floor or a ladder shelf. I glued rubber feet to the front, problem solved.
If doing production, long nails, hard wood... keep batteries ready to go. I find I can run 3 clips of 2 1/2" if attaching solid oak face trim. For regular use and 1 1/2" nails I get 5 to 6 clips through it.
Don't use the belt clip unless you are trying to remove your pants.
High profile theft item, bright yellow, easy to lay about, high dollar value... watch it close or you'll be buying a second one real soon. (Soap Box - Thieves should have a finger removed for each item they steal until they learn or can't pick anything up anymore. Seems fair, 10 chances and all.)
Rather large for tight spots, but amazingly it can get places I would have said it couldn't.
Now, for those that own a selection of 18V tools, consider the kit purchase comes with two batteries... buying two batteries is $100. (you get a 3rd if you buy soon) For me, that's a $100 credit toward the purchase of the gun.
Buy it, enjoy it.
37 of 38 found the following review helpful:
Makes a really cool noise Oct 24, 2004
By Jim I just bought this about 2 weeks ago, so I can't attest to its durability, but this is the best investment I have made in ages. I did drop from a ladder onto concrete, with no problems. I used this to hang a prehung exterior door and put down some shoe molding last week and it was great. I assumed that I would have to wait for it to charge a spring or something before I could shoot a nail, but it's ready to go as soon as you pick it up. When you pick it up and just feather the trigger, two little work lights come on and the motor spins up and it will shoot nails as fast as you pull the trigger. As with all nail guns, it won't shoot until you press the shoe against the wood. It also has a bump-firing mode where you can hold the trigger in and it will shoot a nail every time you bump it. It uses the Paslode 22 deg. nails from 1¼ -2½ . The 2 1/2" nails are great for large trim. I used them to tie doorjambs to the studs. Seems to shoot a zillion nails on a single battery. Much quieter than my air nailers. Nail depth control is the best I have seen. The case has storage room for 4 boxes of nails. The body is big, but it's very light. Get the angled model, not the straight one; they're the same price.
30 of 30 found the following review helpful:
A wonderful addition to my job box and wood shop Jun 19, 2005
By Jason Ledyard
"jdl75"
First, I'll start by saying that I already owned a few DeWalt 18v products, and I have been very pleased with them. I was so tired of carrying around a 75 lb compressor and hose for mid-size trim jobs that I started looking cordless. I'm sure the Passlode is a nice tool, but I already own 18v DeWalt batteries, and I didn't want to deal with the Passlode fuel cells and batteries.
Now, for the performance - this does just as good a job as my DeWalt and PC pneumatic finish nailers. It can sink nails through 1x oak baseboard, through a sheet of plywood and into a stud, and do in with excellent depth consistency. It's not going to replace my pneumatics on a large job, as one battery lasts about 4 clips of nails. It was great for putting up chair rail in the last basement I finished, but if I were trimming an entire house, it would be time to break out the compressor and hoses.
A bonus - I find myself using this for my woodworking projects as well. I can set the depth to leave the nail proud of the surface, and tack items together for gluing. This lets me setup my work without struggling to hold the work and the clamps. Fire a few nails, set down the work and then get the clamps.
I have only two small complaints: One is battery life. It may not be possible to improve it, given all that this gun has to do (I wouldn't give up the work lights for battery life!), so it may be a reasonable compromise, but four clips of nails is not a whole lot. Plan on needing 3 batteries for continuous use.
Second is price. I think the price of the gun is a little steep. My wife gave it to me as a gift, so I can't complain too much - I'd been eyeing it for some time, but couldn't justify the price.
I don't rate many things with five stars, as there is always room for improvement. Four stars, however, is a rating to me that means I'd spend my own money on it again.
UPDATE: I replaced my batteries with new XRP's, replacing some old XR+'s. I now rate this as five stars! It's not the gun eating batteries, mine were worn out. I did a 2000 sq ft house on 2 batteries. Wow.
See all 53 customer reviews on Amazon.com
|  |
| |
|
| |  | |  |
|
 Recently Viewed
|  You may also like ...
|