 Best Sellers | | Home Makita AF505 2-Inch Brad Nailer | |
|  | |  | | | Makita AF505 2-Inch Brad Nailer | | | | | SKU:
RM94487 | | In Stock | | Availability:
Usually ships in 1 business days | | | | | | This powerful nailer has a durable and lightweight die-cast housing with multidirectional exhaust ports to direct exhaust away from operator. Designed with a rubber grip and a tool hook that can be installed on either side of the tool. Anti dry-fire mechanism extends tool life. Clear window allows you to see remaining nails. Operating PSI: 60 - 115, Fasteners Used: Brad nails, Fastener Sizes (in.): 5/8 - 2, Fastener Size (gauge): 18, Fastener Capacity Per Strip: 100, Coil or Strip: Strip, Inlet Size (in.): 1/4, Min. Hose Size (in.): 3/8, Case Included: No, Tool Weight (lbs.): 9 3/4 | | | |
List Price:
| $158.00 | |
Our Price:
| $79.99 | |
You Save:
| $78.01 (49%)
| | Shipping: | This item ships for FREE with Super Saver Shipping. | |
*Shipping:
| |
| | |
|
| | Product Details | | Product Weight: | 6.5 pounds | | Package Length: | 13.8 inches | | Package Width: | 13.4 inches | | Package Height: | 3.9 inches | | Package Weight: | 6.5 pounds | | Average Customer Rating: |  based on 10 reviews |
| |
| | Features | Non-marring rubber nose and bumpers protect the wood's surface from being scratched or damagedSky hook can be rotated 180° and attached on either left or right side so tool can remain close by, but never in the wayDual nail reload indicator windows alert the user when to reload nails to avoid blank drivesMulti-directional exhaust port rotates 360° to direct exhaust air away from userRubber covered hand grip for non-slip, comfortable contact
| |
| | Used and New |
| All | |
| $65.00+ $14.53 *Shipping | Refurbished | | | $79.00+ $23.50 *Shipping | New | | | $79.99 This item ships for FREE with Super Saver Shipping. | New | | | $87.55Shipping Free | New | | | $87.98Shipping Free | New | | | $88.38+ $12.39 *Shipping | New | | | $93.33+ $8.24 *Shipping | New | | | $107.50+ $10.89 *Shipping | New | | | $149.99+ $10.98 *Shipping | New | |
| New | |
| $79.00+ $23.50 *Shipping | New | | | $79.99 This item ships for FREE with Super Saver Shipping. | New | | | $87.55Shipping Free | New | | | $87.98Shipping Free | New | | | $88.38+ $12.39 *Shipping | New | | | $93.33+ $8.24 *Shipping | New | | | $107.50+ $10.89 *Shipping | New | | | $149.99+ $10.98 *Shipping | New | |
| Refurbished | |
| $65.00+ $14.53 *Shipping | Refurbished | |
| |
| | Customer Reviews | Average Customer Review: ( 10 customer reviews )
Write an online review and share your thoughts with other customers.
Most Helpful Customer Reviews
4 of 4 found the following review helpful:
 great little nailer Jan 18, 2008
By Kevin T. Alexander
Great nailer, I haven't had a single problem with it so far. The pic is of the old model. The one I received is in fact the newer model (same model number) with the makita teal-bluish color rubber inlays. Works great.
3 of 3 found the following review helpful:
 Yes its worth the extra money Apr 21, 2011
By A. Mandeville
"Somanytools"
I have to begin by noting that there is a noted price difference between this Makita model and its competitors...I can't say peers as I think this product is not a peer of the cheaper made models by any comparison. But I have to note that it is much more expensive which begs the question? Why
Well its better made, this is not the weekender model, its made for the everyday JOBSITE. That being said though it is not heavy it is well built and hence heavier than the competing models. It's nearly 7#'s dry...but it has a metal in feed and casing. The cheaper Hitachi has plastic ( the more comparable porter cable has metal also).
This unit fired all nails equally well but really stood out on the 2 inch nails. Some guns (porter cable) tend to over fire on the longer nails and dialing in the depth can be problematic resulting in sometimes proud heads or sometimes overdriven heads. This may seem trivial till you shoot 1000 nails of trim and then go back for fill and finish (ie: filling in all nail heads for a perfect finish for paint or staining)
As a PRO carpenter I have to say I appreciated the consistency of this unit and the flawless nailing. The case is a must for any pro or even homeowner that takes care of his/her tools. I also have the Porter cable 2inch brad and if I had to purchase another would get another Makita. They are close in price but I feel the Makita is built better and more consistent with nailing.
Cons of the unit: the huge head for nail placement...its 1/8 by an 1/8th which is fine for wall trim but not for ¼ round or bead trims...I marked it with whiteout so I could find center more easily (this is the one thing my porter has over this unit)
Second and this applies to all manufactures in this category of nailer...give us a bigger window for seeing how many nails we have left. Especially when your on a dedicated trim job its annoying to not notice till your locked out...a 10 nail warning would be great (that's one window basically)
All and all an excellent unit
2 of 2 found the following review helpful:
 waste of money Nov 21, 2008
By jan brecko
Buy any other gun, but do not waste your money on this one. I did use it for about 3 months and I was completly dissappointed. It jamed often and was unable to drive 2" nails into oak at pressure about 120psi. Instead, leaves a nail out and punch another hole next to that nail. If you work with a stain grade materials...get better gun.
1 of 1 found the following review helpful:
Comparing This Makita AF505 to Porter Cable 18 Gauge Brad Nailers Apr 28, 2011
By Bob Feeser
"MillCrafters.com"
I've been a Porter Cable fan for quite some time; I have their 15 gauge, 16 gauge, and both of their 18 gauge nailers. (More about that in a moment) I haven't had any problems with any one of them. I did woodworking for a living for a while and have been an avid woodworker throughout the years. I am installing new sophits around the house. I'm using PVC board. In order to join the pieces together in order to have boards wide enough I am butt jointing the board edges, and using a backing strip with PVC glue and 1 1/4" brad nails to hold it until the glue sets up.
The interesting thing is that I am using both my Porter Cable BN200A which is comparable to the Makita AF505 in every way. They take 18 gauge nails ranging from size 5/8" to 2" and weigh as far as feel goes the same. (I tried looking up the exact weight of these and was unable to get an accurate weight published anywhere on the PC's) So comparing the two, they both felt like they weighed the same. On the other hand Porter Cable also has an 18 gauge nailer in a lighter version; which I have model number BN125A which has been replaced with the BN138. This little beauty is an 18 gauge nailer but only uses nails in the range of 5/8" to 1 3/8". You may be asking why buy the slightly smaller one with a lesser range when you can have the granddaddy for about 20 to 40 dollars more? The answer is that BN138 weighs considerably less than the PC and this Makita. None of these are what you would call heavy, but if you are using them all day long, even a couple of pounds can make a difference. So for fifty nine smackeroos I decided to get the small lighter weight one as well.
So why am I going on about the Porter Cables in the middle of the Makita review? Because there really isn't a lot to say about it. The aluminum nail housing is easy to use and well built. It fires a nail the same exact way the Porter Cable does. On the attractive scale the Makita is top of the heap. They both have the directional blower vent on the top. The noise they make when driving a nail is the same. The Makita predecessor was the AF501 and has since been replaced with this AF505. Makita does not have a lighter weight more limited range nailer equivalent to the PCBN138.
If I had to get critical of the Makita and this is a minor gripe is that they should include at least a small pack of nails in the case. I wanted to be sure to use the right nails, and it was a challenge finding the information to verify that. As it turned out the Porter Cable nails readily available at the big box store fit it, as well as the Hitachi and others. Keeping the gun oiled and making sure the nails are installed in the right direction is key to keeping the gun working properly. You see some reviews slamming the tool, and they may be right, but then again all it takes is one load of nails in the gun upside down, and when that hammer comes down to fire the nail, and it is met with the pointy tip side instead of the flat head side, and then the nail is driven into something with the flat head side trying to make its entry in the work piece, what that scenario you have the hammer hits the sharp part of the nail, and it dances the nail off to one side which forces the nail down the shaft scoring the walls all the way down. That is an ouch. Do that a few times and the gun is not going to work properly any more. So keep it oiled, use the right nails and be sure to place them in the gun in the right direction. If you want to avoid oil stains in your natural finish project, fine only a few nails into a piece of scrap when first oiling it and it won't give you oil residues after that. Also do not soak the thing with oil, only a couple of drops in the air hose intake fitting is all it takes; do it at least daily.
The case it comes with is superb. It is well designed and a great way of protecting your unit. They also include a small bottle of oil with a sealed top that you have to use a pin to create a hole. The safety glasses included in the case is a nice touch as well. It already comes with an air nipple too, the one that is common to the building industry.
I gave it 5 stars because it is well built, drives nails beautifully right out of the case, aesthetically pleasing to look at, has a good feel to it, and is relatively light weight with its aluminum housing. With all 18 gauge brad nailers there are always a couple of reviews with someone who has a broken unit, but in both the Makita and PC there are an overwhelming number of 5 star reviews. If I had to do it over, I am leaning toward the Makita because of its good looks. I know that sounds ridiculous but they seem to match up in every other way, so the looks department is the only thing that separates the two and hands down the Makita is nicer looking. In addition, and I know the prices change all of the time, but the Makita is now twenty dollars cheaper than the PC.
3 of 4 found the following review helpful:
Nice Package Jan 21, 2008
By Lawrence R. Richardson Jr.
"L. Richardson"
Nice nailer. It is quite an upgrade from my 1 1/2 in CH. They even included safety glasses in a nice case.
But the functionality is great. Well balanced in your hand, and not too heavy.
See all 10 customer reviews on Amazon.com
| |
| |
|
| |  | |  |
|
Recently Viewed | You may also like ... |
