 Best Sellers | | Home Milwaukee 7120-21 3/4- to 1-3/4-Inch Coil Roofing Nailer | |
|  | |  | | | Milwaukee 7120-21 3/4- to 1-3/4-Inch Coil Roofing Nailer | | | | | SKU:
MIL7120 | | In Stock | | Availability:
Usually ships in 1-2 business days | | | | | | Milwaukee's Heavy-Duty Coil Roofing Nailer features an ultra lightweight magnesium housing to minimize fatigue. Its compact size offers greater maneuverability. The Load-N-Go magazine holds 120 galvanized wire collated nails from 3/4 in. to 1-3/4 in. length and .120 in. diameter. A magnet holds the nail in place making loading fast and efficient. The thick rubber guards minimize housing damage. The tool-free depth of drive protects from overdriving nails. The self-cleaning air filter extends life by preventing dirt and debris from entering the tool. The adjustable air deflector with muffler directs exhaust away from the work area and holds down the noise. The textured selectable trigger lets you move from sequential or contact actuation by simply turning a knob. A removable shingle guide assists in quick shingle alignment. | | | |
List Price:
| $570.00 | |
Our Price:
| $199.99 | |
You Save:
| $370.01 (65%)
| | *Shipping: | $10.97 | |
*Shipping:
| |
| | |
|
| | Product Details | | Product Length: | 0.0 inches | | Product Width: | 0.0 inches | | Product Height: | 0.0 inches | | Product Weight: | 0.0 pounds | | Package Length: | 15.4 inches | | Package Width: | 14.1 inches | | Package Height: | 6.4 inches | | Package Weight: | 9.55 pounds | | Average Customer Rating: |  based on 56 reviews |
| |
| | Features | Operating pressure min-70 PSI, Max-120 PSI; air consumption .08 ft3/cycles at 100 psiFastener length minimum 0.75 inches and maximum 1.5 inches; fastener diameter 0.120 inches120 nail magazine capacity15 degree collation angle; 3/8 in. NPT air inlet5-year limited warranty
| |
| | Used and New |
| All | |
| To see price, add to cart.+ $7.99 *Shipping | Refurbished | | | $199.99+ $10.97 *Shipping | New | |
| New | |
| $199.99+ $10.97 *Shipping | New | |
| Refurbished | |
| To see price, add to cart.+ $7.99 *Shipping | Refurbished | |
| |
| | Customer Reviews | Average Customer Review: ( 56 customer reviews )
Write an online review and share your thoughts with other customers.
Most Helpful Customer Reviews
24 of 25 found the following review helpful:
 Better than the hitachi? Nov 16, 2006
By Dave W
"Following Jesus"
First off. I do not do roofing full time, I am a remodeler, I do a few houses a year. The guy I work with has the Hitachi NV45AB but we needed to have another gun this fall. I buy nothing but high quality tools, and most professional roofers use the Hitachi. I did a lot of comparing before I decided on this gun. The thing that got me was the price, I got a very good deal on this gun from the contractor tool store.
After using this gun and the Hitachi NV45AB on three roofs last month(about 100 square), here are my observations. (I have used the Hitachi for a few years)
The Milwaukee is lighter without a doubt, much nicer to carry around all day.
The nail loading mechanism is much nicer on the Milwaukee. You only have to open the feed flip, and the coil comes open too. The hitachi has a separate clip to open the coil, and it is underneath so you have to turn the gun upsidedown to load it. (that may seem like not a big deal, but when you are putting in a new coil every 5 minutes it is a big deal)(I believe hitachi's new nailer has the side load mechanism as well)
The rubber side grips are nice, it will stay on a 7/12 pitch.
You can move the shingle guide without an allen wrench.
It shot 1-3/4 nails much better than the hitachi.
I am not sure why they put sequential and bump firing modes on this gun. If you want to have any speed at all you will always use bump mode. Anyways, that isnt a problem, it just seems strange on a roofing gun.
It is comfortable to use, and I never had any jams. It comes with a nice molded case.
13 of 13 found the following review helpful:
Good performing tool Feb 07, 2007
By Pete Lokey
I was a little apprehensive about purchasing a tool that is brand new to the market, but having owned and operated various Milwaukee power tools for a number of years, and reading other reviews of this specific coil nailer, I decided to give it a go. I am a professional contractor and have used Porter Cable coil roofing nailers before trying the Milwaukee. I found the Milwaukee to be very smooth, and experienced minimal jams. It also required less air pressure to achieve proper nail driven depth, although this posed to be an issue as I was running Porter Cable nailers on the same line. I added an additional pressure regulator and took care of that problem. The bumpers on the gun proved to be useful a number of times and prevented the gun from sliding off the roof. I gave the nose attachment a whirl (for auto-positioning the nails by butting the attachment up against the shingle edge) but found it to be an annoyance as well as slowing me down. Coil changes were very easy - quicker and smoother than the Porter Cable. I'll replace one of my PC guns with another Milwaukee when it fails.
11 of 12 found the following review helpful:
So Far, Really Good Aug 16, 2006
By CD Junkie
Recently bought this and have just finished two small roofs. ZERO jams, consistant depth (even with a "cheesy" compressor), and really easy to load and adjust. TRUTH IN ADVERTISING NOTE: This is my first roofing nailer, so I can't compare it to Bostich, PC, Senco..., but I'm really impressed with how well this one works. I expected some random problems, but so far have had NONE.
13 of 15 found the following review helpful:
Works Great!! Jun 11, 2006
By W. Lehman
I ordered this nailer to reroof my house and it has worked flawlessly, it drives the nails to the same depth everytime and is easy to use. The selectable trigger is a nice feature. I would easily recommend it.
5 of 5 found the following review helpful:
 Milwaukee should provide a quick release nipple Nov 12, 2007
By jbs
First off...my ownly complaint is the Milwaukee does not provide a quick release nipple to thjread into the air port. To complicate matters, the air port is not the commonly used 1/4 thread, but rather a 3/8 thread. So you need to locate and purchase both a 3/8 -to- 1/4 reducer bushing and also the quick release nipple. Once got past this problem, I was very pleased with the gun. It is light, easly to operate and well designed in terms of both selector switches for nail depth and sequential firing. Definately a very good value for the money.
See all 56 customer reviews on Amazon.com
| |
* Estimated shipping rate for US 48 states. Final rate calculated at checkout. | |
|
| |  | |  |
|
Recently Viewed | You may also like ... |
